XS-LD127P5
* 12″ Woven Conex Cone
* 1600W Peak Power (500W RMS)
* Dual 4-Ohm Voice Coils
* 4-Layer Cone Construction
* 5-Way Gold-plated Binding Posts
* 12″ Woven Conex Cone
* 1600W Peak Power (500W RMS)
* Dual 4-Ohm Voice Coils
* 4-Layer Cone Construction
* 5-Way Gold-plated Binding Posts
February 2nd, 2012 at 6:28 am
Power and gronud should be the same size.If your total system power is a 1000 watts RMS or more you will need to:1. Upgrade the alternator to a high output alternator2. Upgrade to a heavy duty deep cycle battery3. Upgrade the “Big 3″ - that is to replace the power wire between the battery and alternator, the gronud from the battery to the chassis and the gronud strap from the engine/tranny to the chassis with at least 1/0 AWG wire.Failure to do this will result in you replacing them anyway as the alternator will eventually fail.Here is a guide that will calculate what size alternator and power wires you need as well how to set the gainYou’ll need Microsft Excel to use it.A second battery is never a good idea as it’s just an added strain on the alternator unless you plan on running the system with the engine off. A cap is only good so far as the audio system isn’t trying to pull too much from the electrical system. A cap doesn’t provide more power, it’s designed to ’stiffen’ the voltage to the amp, nothing esle. If the current isn’t there, a cap won’t help.See my site for more info
February 3rd, 2012 at 9:19 am
AlhMht bxvervoyarla